Product
Submersible pump for dewatering building yards, draining water in flooded areas and other similar applications. The pump can handle water containing relatively abrasive solids.
|
| Denomination |
|
| Product code |
2008.211 |
![]() |
| Installation |
BS |
![]() |
| Impeller characteristic |
MT |
![]() |
| Discharge connection |
2” |
![]() |
| Process data |
|
| Liquid temperature |
max +35° C (95° F) |
![]() |
| Depth of immersion |
max 5 m (16.5 ft) |
![]() |
| pH of the pumped liquid |
pH 3 - 9 |
![]() |
| Liquid density |
max 1100 kg/m3 |
![]() |
| Strainer hole size |
11 mm x 5 mm |
![]() |
| Motor data |
|
| Squirrel cage 1-phase induction motor. |
![]() |
| Frequency |
50 Hz |
![]() |
| Insulation class |
F (+155°C/311°F) |
![]() |
| Voltage variation |
![]() |
| - continuously running |
max ± 5% |
![]() |
| - intermittent running |
max ± 10% |
![]() |
| Voltage imbalance between phases max 2% |
![]() |
| No. of starts/hour |
max 15 |
![]() |
| Cable |
|
| H07RN-F |
3x1 mm2 |
![]() |
| Monitoring equipment |
|
| Thermal contacts |
![]() |
|
| Material |
|
| Outer casing |
Stainless steel |
![]() |
| Impeller |
Polyurethane |
![]() |
| Stator housing |
Stainless steel |
![]() |
| Strainer |
EPDM rubber |
![]() |
| Shaft |
Stainless steel |
![]() |
| O-rings |
Nitrile rubber |
![]() |
| Mechanical face seals |
|
| Inner |
Carbon/Ceramic |
![]() |
| Outer |
Silicon carbide/Silicon carbide |
![]() |
| Weight |
|
| Total (excl. cable) |
12.5 kg (25.7 lb) |
![]() |
| Accessories |
|
| Level control, low suction unit. |
![]() |
| Rating |
|
| 1~ |
![]() |
| Rated output |
750 W |
![]() |
| Speed of rotation |
2770 rpm |
![]() |
Voltage
V |
Rated current
A |
Starting current
A |
| 115 |
8.7 |
43 |
| 230 |
4.2 |
19 |
|
Products
